12V Automotive Smoke EVAP Machines Leak Detector Diagnostic Pipe Leakage Tester

Description

Specification Output Pressure: 7-12 PSI Output Flow: <6 L/Min Power Supply: 12V automobile Battery 6Amp Air Pressure Output: Built-in air pump Test Oil Capacity: 10-20ml Length of Power Cord: 2.5Meters Length of Smoke Hose: 2.5Meters Package Weight: 2.3kg/5 lb Main Unit Dimensions: 7.28*5.11*3.34 inch Package Dimensions: 12.2*9.44*4.52 inch
ANCEL S3000 Automotive EVAP Vacuum Smoke Machine Diagnostic Leak Detection Test
Automotive EVAP Smoke Machine
ANCEL S3000 New Model DC12V Automotive Smoke Machine Leak Detector for Cars/Motorcycles/Trucks/Boats/ATVs
With ANCEL S3000 EVAP smoke machine, you can greatly reduce the troubleshooting duration for vacuum leaks and other problems.
Full system diagnostics, don't miss any leaks !
✔️
Built-in Air Pump Saves Time and Money
: ANCEL S3000 smoke machine automotive comes with tons of accessories that allow you to use it on just about any vehicle, unlike other EVAP smoke machines that you’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, ANCEL S3000 smoke machine automotive already has that feature built-in. So you’re saving some extra money!
✔️
Dual Testing Model
: ANCEL S3000 EVAP smoke machine come with a dual testing model including air mode and the smoke mode. Air Mode:Independent controlled built-air pump. Smoke Mode: Independent controlled smoke generator. These enable you detect the leaks precisely.
✔️
Instant Smoke Generation
: Press Smoke Control switch, the LED Indication would turn GREEN, and the car smoke tester start to generate smoke within seconds. One of the biggest hassles with the automotive smoke machines is the time of heating of the device. You won’t have to wait for the tester to warm up with ANCEL S3000 smoke machine automotive.
✔️
Overload Protection:
ANCEL S3000 automotive smoke machine leak detector has built in self-protective system:Overheat and Anti-frost Protection. When the temperature of the device exceeds 120℃, power protection will be intelligently activated to turn it off. The device can also work normally at -20℃. You don’t have to worry about switching on and off the machine constantly during diagnosis. The system takes care of the load for you.
✔️
Wide Compatibility
: ANCEL S3000 smoke machine automotive used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. The smoke machine automotive is suitable for all makes and models of cars.
✔️
Various System Test
: Crankcase System Test; Intake System Test; Car Sealing Test; Fuel Tank System Test; Turbo System Test; EVAP System Test; Exhaust System Test; Various Pipe Fittings Test. (Note: Not applicable to air conditioning system piping, Lamp housing) It can quick to find evap leaks.
✔️
Save Money by Using Baby Oil or Mineral Oil
: You don't need to buy expensive smoke oil. Use baby oil, Pure #5 white oil is the best choice if available. This makes ANCEL S3000 smoke machine automotive practically free to use forever!
✔️
Easy To Use
: The Smoke Machine Automotive with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system, dramatically reducing diagnostic time.
Pressure Gauge
The Automotive EVAP Smoke Machine equipped with a liquid filled pressure gauge. By observing the change of pressure gauge, the leakge situation is clear at a glance.
Adjustable Air Flow
Output Flow: <6 L/min
Air flow meter with adjustable button, easy to control the smoke effect.
Fast Smoke Output
This machine built-in air compressor, with superior wick and heating element. It can produce smoke instantly by heating up USP mineral oil or baby oil. 4ft Smoke Outlet Pipe can help reach and connect perfectly.
Overheat & Anti-frost Protection
This smoke detector is equipped with the latest intelligent protection device. When the temperature of the device exceeds 75 degrees Celsius, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. The device is also suitable for low temperature operation.
Easy to Use
The smoke leak detector with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system. Dramatically reducing diagnostic time. The hook allows you to hang it on your hood latch, the conical adapter will fit most intakes.
Wide Range of Applications
Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault.
Leak Status Indication
NO Leak
: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system.
Small Leak
: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system.
Massive Leak
: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.
How to do leakage test ?
1. Turn OFF the ignition of the vehicle. LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF.
2. Dismantle the air filter and the throttle connections.
3. Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake Adapter into the opening.
4. Connect the Power Cord to 12V vehicle battery.
5. Now the Power LED would be ON, if else check the power supply.
6. Introduce the smoke nozzle into the system via the Adapter Cone.
7. Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter
8. Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle.
9. The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist.
10. After test, press Smoke Control Switch again to stop the unit from generating smoke and press Air Control Switch to stop generating pressurized air.
11. Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.
Caution：
1.When you use this ANCEL S3000 Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range.
2.The testing liquid : both liquid paraffin and baby oil are OK.
3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5.During the process of leak detection, please keep away from smoke-sensitive parts.
6.Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7.The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8.The round part of this detector has temperature, please be careful to avoid burns.
9.If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
Packing List :
Oil Refill Port: For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit.
Velcro Strap For collection of the smoke delivery hose, and power cord before storage.
Pressure Gauge: Displays the output pressure of the machine or show the real time pressure of the system been testing.
Air Flow Meter: Provide a quick visual indication of the amount of air/smoke passing through the system being tested.
Flow Dial: Easy to control the smoke and air amount, determine the exact location of the leak easily and quickly
Oil Level Gauge: Allow you to accurately control the test oil volume.
Smoke Control: After pressing this switch, the power indicator light is on to indicate that the power supply is normal.
Air Control: Press the AIR MODE, pump starts working, only after this, you may press and start the SMOKE MODE.
Payment
Shipment
About US
Customer Services
Contact us
Payment
-We accept payment via Paypal.
-Payment must be made within 7 days. If you don't make the payment within 7 days, you may received a Non-payment message automatically sent from eBay.
Non-payment may result in an UPI (Unpaid Item), eBay will automatically close your account if you accumulate 4 UPI's total. Total amount due includes the final auction price plus S&H(Shipping and Handling).
-Your package will be out within 1 business day after payment cleared.
Shipment
1.Shipping address supplied by Paypal is acceptable.
2.
All parcels will be send via USPS/USPS priority/UPS/ Expedited Shipping
3. After the payment cleared, your order will be sent out within 1 business days (not including holiday and weekend).
4. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
5. Any further queries, please don't hesitate to email us. Thank you.
About US
-We are a professional Authorized dealers of
AUTEL, ANCEL, AUTOPHIX, FOXWELL, KZYEE, LAUNCH, NEXAS, Vgate, OBDPROG,OBDSTAR etc
.
Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
- We supply many products on Automobile consumer.
There are OBDII cars / Light Trucks / Heavy Duty Truck's Diagnostic Tool, Mileage Correction & Key Program tool, Battery Tester, Fuel Injector Cleaner, Digital Circuit Tester, lgnition Spark Tester
and much more others products.
-We are eager to be your professional partner of automobile diagnostic tool.
-We support remote assistance by TeamViewer if you have any difficulty in software installation.
Customer Services
1. Please do not hesitate to leave us your
5 Star ★★★★★ of DSR positive feedback
if you are satisfaction with our products ,delivery or services .
2. If you
have Any Questions Or unsatisfied with your purchase, please email us first to get a better solution
before you leave a neutral or negative feedback
,
we work hard to make sure every customer 100% satisfied and resolve any problem for you.
Thank you for your kindness.
Contact us
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2. Please email us first
before giving negative feedback or opening a case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and Holidays） .
Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .